TM 5-5420-202-20-2
ENGINE OIL COOLER (LEFT AND RIGHT) REPLACEMENT (Sheet 5 of 6)
10.
Using 1/2 inch socket with extension
through harness and into bracket, install
two lockwashers and screws (E).
Using 9/16 inch wrench, install oil cooler
11.
vent hose (F) at top of cooler.
Remove plastic material and masking tape
12.
from ends of hose (G) and oil cooler connector
(H).
13.
Using 1/2 inch socket, install three nuts
(J) securing gasket and oil cooler connector
(H) to oil cooler.
Using 1-1/2 inch wrench, install hose (G) at
14.
oil cooler connector (H).
Remove plastic material and masking tape
15.
from ends of hose (K) and oil cooler connector
(L).
Using 1/2 inch socket, install three nuts
16.
(M) securing gasket and oil cooler connector
(L) to oil cooler.
Using 1-1/2 inch wrench, install hose (K) to
17.
oil cooler connector (L).
Go on to Sheet 6
6-23