TM 5-5420-202-20-2
ENGINE OIL COOLER (LEFT AND RIGHT) REPLACEMENT (Sheet 6 of 6)
18.
Using 3/4 inch socket and torque wrench tighten
valve (M) to no more than 150 lb-in. (17 NZm).
19.
Install new washer on screw (N).
20.
Using 1/2 inch socket, install screw (N).
21.
Check engine oil level indicator gage rod.
22.
Replenish lubricating oil lost during oil cooler
r e p l a c e m e n t . (LO 5-5420-202-12)
23.
Connect engine for powerplant ground hop
24.
Start and run engine. Check for oil leaks at
oil cooler and line connections.
25.
Shut down engine. Disconnect engine from
powerplant ground hop (page 5-40).
26.
Install engine shroud (page 9-31).
27.
Install powerplant (page 5-14).
End of Task
6-24
