TM 5-5420-202 -20-2
ENGINE OIL FILTER ELEMENT REPLACEMENT (Sheet 2 of 5)
REMOVAL:
1.
Using 9/16 inch socket, remove screw (A) and sealing washer from
filter element cover (B). Discard sealing washer.
2.
Using wrench, turn valve (C) to
the left six full turns.
NOTE
Wait about five minutes before doing
steps 3 thru 7.
3.
Using 9/16 inch socket, remove
ten self-locking nuts and washers
(D).
4.
Install two 3/8-24UNF by 3-inch screws
in threaded holes (E).
5.
Using 9/16 inch socket, tighten
screws in hole (E) and remove filter
cover (B).
6.
Remove gasket (F) and throw away gasket
(F).
Go on to Sheet 3
6-77
