TM 5-5420-202-20-2
ENGINE OIL FILLER CAP REPLACEMENT (Sheet 2 of 3)
3. Using socket, remove eight screws
and washers (C).
4.
Open filler cap (D), remove gage (E)
from inside of cap.
5.
Remove front engine access plate (F)
and cap assembly (G) by pulling up on
cap (D).
6.
Using socket, remove two screws (H)
and washers (J).
7.
Remove cap assembly (G) and gasket
(K) from access plate (F). Throw gasket
(K) away.
Remove two preformed packings (L).
8.
Throw preformed packings (L) away.
Go on to Sheet 3
6-82
