TM 5-5420-202-20-2
ENGINE OIL FILTER ELEMENT REPLACEMENT (Sheet 5 of 5)
Install filter cover (D), making sure hole
3.
(E) is at the top.
Using 9/16 inch socket, remove screws
4.
from hole (F).
Place clamp (G) in position on filter cover
5.
(D).
6.
Using 9/16 inch socket, install ten self-
locking nuts and washers (H) to secure
cover. Do not overtighten as stripping may
result.
Using 3/4 inch wrench, tighten valve (J). Using torque wrench and 3/4 inch socket,
7.
tighten valve (J) to 150-180 lb-in (17-29 NZm).
Using 9/16 inch socket, install and tighten new washer and capscrew into hole (E).
8.
Connect fire extinguisher line (page 5-21, step 55).
9.
10.
Start and run engine (TM 5-5420-202-10). Check for oil leaks.
11.
Shut down engine.
12.
Install upper engine access cover (page 17-12).
13.
Replenish engine oil (LO 5-5420-202-12).
End of Task
6-80
