TM 5-5420-202-20-2
MULTIPLE FLUID PRESSURE LINE CONNECTOR REPLACEMENT (Sheet 2 of 6)
2.
Using 1 inch wrench, loosen hose
connector (D) while holding retaining
nut (E) with 1-1/8 inch open end wrench.
3.
Remove hose (F) from connector
(G).
4.
Using 1-1/8 inch deep well socket
wrench, remove retaining nut (E)
and washer from connector (G).
6.
Using 11/16 inch wrench, loosen hose
(H) and remove from elbow (J) on the
r i g h t turbosupercharger.
7.
Repeat step 6 on left turbosupercharger
to remove other hose.
Go on to Sheet 3
6-102
