TM 5-5420-202-20-2
MULTIPLE FLUID PRESSURE LINE CONNECTOR REPLACEMENT (Sheet 4 of 6)
3.
Connect hose (D) to connector (A).
4.
Using 1 inch wrench, tighten hose connector
(D). Make sure connector (A) is installed
with hose fittings pointed down.
5.
Connect hoses (E) and (F) to connector (A).
6.
Using 11/16 inch wrench, tighten connectors
(E) and (F).
7.
Position hose (F) so that free end passes
through right engine shroud. Using fingers
and flat-tip screwdriver position grommet (G)
over hose and into shroud.
Go on to Sheet 5
6-104
