TM 5-5420-202-20-2
FUEL PUMP TO FUEL WATER SEPARATOR HOSE ASSEMBLY REPLACEMENT (Sheet 3 of 5)
NOTE
Use suitable container to catch
fuel spillage whenever any fuel
line or fitting is loosened or re-
moved. Use cloth to wipe any
spillage. Discard cloth and
drained fuel in accordance with
local procedures.
7.
Using 7/8 inch wrench, loosen nut (D).
8.
Disconnect hose assembly (E) from fuel
pump (F).
Using 7/8 inch wrench, loosen nut
9.
(G) from elbow (H).
10.
Disconnect hose assembly (E)
from elbow (H).
INSPECTION:
1.
Check assembly components for cracks, breaks, frayed hose, crossed threads, and general
serviceability.
2.
Replace components as necessary.
Go on to Sheet 4