TM
5-5420-202-20-2
AIR CLEANER OUTLET HOSE ASSEMBLY REPLACEMENT (Sheet 3 of 3)
3.
Put clamp (C) on turbosupercharger
elbow flange.
Position hose assembly (D) between air
4.
cleaner outlet elbow and turbosuper-
charger inlet elbow.
Aline hose flange to turbosupercharger
5.
elbow flange. Position clamp (C) on hose
assembly (D) and hand tighten clamp nut.
6.
Aline hose flange to air cleaner outlet elbow and install clamp (E).
Engage "T" bolts to hasp on clamp (E) and close clamp handle.
7.
Install pin (F) to secure clamp handle.
8.
Using socket, tighten adjusting nut (G)
9.
on clamp (E) to eliminate clearance
between hasp and "T" bolt. Turn nut
one additional turn.
Using socket and torque wrench,
10.
tighten nut of clamp (D) to 25 to 35 lb-in
(3 to 4 NZm).
11.
Close top deck door assemblies (TM
Change 1