TM
5-5420-202-20-2
AIR CLEANER MANIFOLD AND RELATED PARTS REPLACEMENT (Sheet 3 of 4)
INSTALLATION:
Position bracket (A) to manifold (B).
1.
2.
Using 7/16 inch wrench, install screw (C) and new lockwasher (D) to secure manifold (B) to
bracket (A).
Apply silicone compound to inside ends of
3.
two new hoses (E).
Slide hoses (E) onto manifold (B).
4.
5.
Install new gasket (F) onto manifold (B).
Position manifold into housing.
6.
7.
With hoses (E) facing up, install two
clamps (G) onto each hose (E).
8.
Rotate manifold (B) until hoses (E)
line up with precleaned tubes (H).
Slide hoses (E) onto precleaner tubes
9.
(H).
10. Using 1/2 inch wrench, install screw (J) and new lockwasher (K) to secure bracket (A) to
bottom of housing.
11.
Apply a thin coat of sealing compound to threads of four screws (L).
12. Using 7/16 inch wrench, install four screws (L) and new lockwashers (M) to secure mani-
fold (B) and gasket (F) to side of housing.
13.
Position clamps (G) on hoses (E) over manifold (B) and precleaned tubes (H). Use screw-
driver and tighten clamps (G).
Go on to Sheet 4
Change 1