TM
5-5420-202-20-2
DUST DETECTOR PRESSURE SWITCH AND BRACKET REPLACEMENT (Sheet 3 of 4)
Using 9/16 inch wrench, remove
6.
assembled washer-screw (J) securing
bracket (K). Remove bracket with pres-
sure switch (B) from turbosupercharger.
7.
Using 7/16 inch wrench, remove three
screws (L) and lockwashers (M) securing
pressure switch (B) and ground lead (N) to
bracket (K).
8.
Remove pressure switch (B).
INSTALLATION:
Position pressure switch (A) to bracket (B).
1.
2.
Using 7/16 inch wrench, install three
screws (C) and three new lockwashers (D)
to secure pressure switch (A) and ground
lead (E) to bracket (B).
Go on to Sheet 4
Change 1