TM 5-5420-202-20-2
RIGHT FUEL TANK FILLER REPAIR (Sheet 4 of 6)
If required, use diagonal cutting pliers to
9.
remove lockwire (N) securing screws (P).
10.
Using allen wrench, remove eight screws (P)
securing filler neck (E) to fuel tank (Q).
Remove filler neck (E) from fuel tank (Q).
11.
Remove strainer element (R) from fuel
12.
tank (Q).
CLEANING:
T o prevent personal injury, wear
D r y cleaning solvent P-D-680 is toxic and flammable.
protective goggles and gloves and use only in a well-ventilated area Avoid contact with skin,
eyes, and clothes and don't breathe vapors. Do not use near open flame or excessive heat. The
flash point for Type #1 Dry Cleaning Solvent is 100F (38C) and for Type #2 is 138F (50C).
If you become dizzy while using cleaning solvent, get fresh air immediately and get medical aid.
If contact with eyes is made, wash your eyes with water and get medical aid immediately.
Using dry cleaning solvent, clean
1.
strainer (R).
Using putty knife, dry cleaning
2.
s o l v e n t , and lint-free cloth,
clean around filler hole area
of fuel tank (S).
INSPECTION:
Inspect strainer (R) for contamination
or damage. Replace strainer (R) if
unserviceable.
Go on to Sheet 5