TM 5-5420-202-20-2
FUEL-WATER SEPARATOR DRAIN LINES REPLACEMENT (Sheet 3 of 6)
6.
Using 9/16 inch wrench, remove
nut (D) securing clamp (E).
7.
Remove clamp (E) from hose
assembly (F).
8.
Using 9/16 inch wrench,
disconnect hose assembly
(F) from elbow (G).
Using 11/16 inch wrench to hold
9.
adapter (H), use 9/16 inch wrench
and disconnect hose assembly (F)
from adapter (H).
Remove hose assembly (F).
10.
11.
Using 9/16 inch wrench, disconnect
hose assembly (J) from tee (K).
12.
Using 5/8 inch wrench to hold
tee (K), use adjustable wrench
and remove drain valve (A).
Using 11/16 inch wrench to
13.
hold adapter (H), use 11/16
inch wrench and remove nut
and lockwasher (L). Tee (K)
and adapter (H) will fall
free when nut (L) is removed.
Install tee (K) into vise and, using 11/16 inch wrench, remove adapter (H) from tee (K).
14.
Go on to Sheet 4
7-219
