TM 5-5420-202-20-2
FUEL-WATER SEPARATOR DRAIN SOLENOID VALVE REPLACEMENT (Sheet 3 of 3)
INSTALLATION:
NOTE
Coat all exposed threads of
adapter and elbow with zinc-
chromate before installing.
1.
Using 9/16 inch wrench, install elbow
and tube (A) to solenoid valve (B).
2.
Using 9/16 inch wrench, install adapter
(C) in solenoid valve (B).
3.
Position solenoid valve (B) to bracket.
4.
Using 5/16 inch wrench, install two
screws and lockwashers (D) to secure
solenoid valve (B) to bracket (E).
5.
Using two 9/16 inch wrenches, connect
hose assembly (F) to adapter (C).
6.
Connect electrical lead (G) to solenoid
valve (B).
7.
Using 1/2 inch wrench, turn bleed
cap (H) clockwise until snug.
Test fuel-water separator (page 7-223).
8.
Install powerplant (page 5-14).
End of Task
9.
7-216