TM
5-5420-202-20-2
MANIFOLD HEATER FUEL RETURN HOSE ASSEMBLY REPLACEMENT (Sheet 2 of 4)
NOTE
Use suitable container to catch fuel whenever any fuel
line or connection is loosened or disconnected. Use cloth
to wipe any spillage. Discard cloth and drained fuel in
accordance with local procedures.
1.
Using 7/16 inch and 9/16 inch wrenches,
disconnect hose assembly (A) from elbow (B).
2.
Using 7/8 inch wrench, disconnect hose
assembly (C).
3.
Using 7/16 inch and 9/16 inch wrenches,
disconnect hose assembly (A) from elbow (D)
on engine side of shroud support.
4.
Remove grommet (E) from shroud support
and from hose assembly (A).
5.
Pull hose assembly (A) from shroud support.
C L E A N I N G AND INSPECTION:
1.
Using wire brush, clean threaded parts.
2.
Inspect all hoses and fittings and replace as necessary.
Go on to Sheet 3