TM 5-5420-202-20-2
TRANSMISSION SHROUD REPAIR (Sheet 4 of 6)
11.
Using 3/4 inch socket and 3/4 inch wrench, remove three turnlock fasteners (S) from
both sides of shroud (E).
C L E A N I N G AND INSPECTION:
Dry cleaning solvent P-D-680 is toxic and flammable. To prevent personal injury, wear
protective goggles and gloves and use only in a well-ventilated area Avoid contact with skin,
eyes and clothes and don't breathe vapors. Do not use near open flame or excessive heat. The
flash point for Type #1 Dry Cleaning Solvent is 100F (38C) and for Type #2 is 138F (50C).
If you become dizzy while using cleaning solvent, get fresh air immediately and get medical aid.
If contact with eyes is made, wash your eyes with water and get medical aid immediately.
U s i n g dry cleaning solvent and rags, clean all parts of transmission shroud.
1.
2.
Inspect assembly for worn or damaged parts.
3.
Replace faulty parts.
Go on to Sheet 5