TM 5-5420-202-20-2
TRANSMISSION SHROUD SUPPORTS (LEFT OR RIGHT) REPLACEMENT (Sheet 1 of 1)
TOOLS:
Ratchet with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
2 in. extension with 1/2 in. drive
PRELIMINARY
PROCEDURES:
Remove transmission shroud assembly (page 9-2).
REMOVAL:
1.
Using socket and extension, remove
three screws, washers, and lock-
washers (A) holding (left or right)
support (B) to hull wall.
Remove supports from vehicle.
2.
INSTALLATION:
1.
Position support (B) (left or right) on hull wall and attach supports with three screws,
washers, and lockwashers (A).
2.
Using socket and extension, tighten
three screws, washer, and lockwasher (A).
3.
Install transmission shroud assembly (page 9-6).
End of Task