TM 5-5420-202-20-2
TRANSMISSION SHROUDS REPLACEMENT (Sheet 6 of 8)
Lower Shroud Replacement (Sheet 1 of 2)
1/2 in. socket with 1/2 in. drive
TOOLS:
Ratchet with 1/2 in. drive
1/2 in. combination box and open end wrench
6 in. flat-tip screwdriver
2 in. flat-tip screwdriver
Remove powerplant (page 5-2).
P R E L I M I N A R Y PROCEDURES:
Remove engine shroud (page 9-30).
(right side only).
NOTE
NOTE
When lower shroud is removed, a grommet
Replacement of right and left lower shrouds
(G) may come out with it or stay on fuel
(A) is similar. Left lower shroud (A) is shown.
return Iine.
REMOVAL:
Using 2 inch screwdriver, remove screw
1.
(B).
Using 6 inch screwdriver, remove screw
2.
(C).
3.
Using socket or wrench, remove three
screws and washers (D).
Using socket or wrench, remove screw
4.
and washer (E) securing clamp (F).
Remove lower shroud (A). Be careful
5.
not to damage fuel return line when
removing shroud (A).
Inspect grommet (G) for tears or deterioration.
6.
R e p l a c e if defective.
Go on to Sheet 2
