TM 5-5420-202-20-2
ENGINE SHROUD REPAIR OFF ENGINE (Sheet 1 of 2)
TOOLS:
Putty knife
Ratchet with 1/2 in. drive
7/16 in. socket with 1/2 in. drive
SUPPLIES:
Dry cleaning solvent (Item 55, Appendix D)
Gloves (Item 69, Appendix D)
Rags (Item 65, Appendix D)
Goggles (Item 70, Appendix D)
Adhesive (Item 4, Appendix D)
Insulation
PRELIMINARY
PROCEDURES:
Remove engine shroud (page 9-30).
DISASSEMBLY:
1.
Using
socket,
remove
six
screws (A), lockwashers (B),
a n d flat washers (C) securing
r e t a i n e r (D) to engine shroud
(E) both sides.
2.
Using socket, remove
six screws (F), lockwashers
(G), and flat washers
(H) securing retainer
(J) to engine shroud
(E) both sides.
3.
Remove retainers
(D) and (J).
4.
Using putty knife,
remove insulation
(K) and (L) from both
sides of engine shroud
(E).
5.
Using dry cleaning
solvent and rags, clean
areas where insulation
(K) and (L) were removed.
Go on to Sheet 2