TM 5-5420-202-20-2
CENTRIFUGAL FAN HOUSING REPLACEMENT (Sheet 1 of 3)
TOOLS:
1/2 in. socket with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Thickness gage (feeler gage)
9/16 in. open end wrench (2 required)
P R E L I M I N A R Y PROCEDURE:
Remove engine shroud (page 9-30)
REMOVAL:
Do not drop screws or Iockwashers into fan
housing as damage to fan could result.
1.
Using 9/16 inch socket, remove eight
screws (A) and lockwashers holding
two fan housings (B) to engine (front
end and flywheel end).
Go on to Sheet 2
