TM 5-5420-202-20-3
ENGINE GENERATOR REGULATOR REPLACEMENT (Sheet 1 of 2)
Spanner
wrench
TOOLS:
7/16 in.
socket with 1/2 in. drive
Flat-tip
screwdriver
with 1/2 in. drive
SUPPLIES:
Remove access cover from floor in commander's
PRELIMINARY
PROCEDURE:
compartment (page 17-9)
REMOVAL:
w r e n c h , remove two electrical connectors ( A ) from engine generator
1.
Using spanner
regulator (B).
2. Using screwdriver, remove screw (C) securing ground (D) to engine generator regulator
(B).
3.
Remove ground (D) and lockwasher (E) from engine generator regulator (B).
Using socket, remove screw (F) and two lockwashers (G) securing ground (D) to hull.
4.
5. Using screwdriver, loosen four screws (H) securing engine generator regulator
(B) to mounting bracket (J).
6. Remove engine generator regulator (B) from vehicle.
Go on to Sheet 2
TA248959