TM 5-5420-202-20-3
HIGH VOLTAGE IR POWER SUPPLY AND SHOCK MOUNT ASSEMBLY REPLACEMENT
(Sheet 3 of 6)
Remove power supply (B) from vehicle
7.
to bench.
8.
Remove ground strap (N), two lock-
9.
washers (P), washer (Q), washers (R),
and washers (S) from bracket (M).
Remove power supply (B) from
10.
bracket (M).
11.
Using 1/4 inch wrench to hold
nut (T), use flat-tip screwdriver
to remove two screws (U), lockwashers
(V), and mount (W) from each end of
both brackets (M).
Go on to Sheet 4
TA249095
10-154
