TM 5-5420-202-20-3
MASTER RELAY MOUNTING PLATE AND BRACKET REPLACEMENT (Sheet 1 of 2)
TOOLS:
9/16 in. socket with 1/2in. drive
1/4 in. drive punch
1/2 in. socket with 1/2 in. drive
Hammer
Ratchet with 1/2 in. drive
SUPPLIES
Nut (2 required)
Lockwashers (4 required)
Remove master relay assembly (page 10-138)
PRELIMINARY PR0CEDURE:
REMOVAL:
1.
Using 1/2 inch socket, remove
two screws (A), and lockwashers
(B) securing bracket (C) to
plate (D).
2.
Remove mounting bracket (C).
3. Using 9/16 inch socket, remove
two screws (E), and lockwashers
(F).
4. Using 9/16 inch socket, remove
two screws (G) and lockwashers (H).
5. Remove plate (D) from vehicle to work
bench.
6. Using hammer and punch, tap out
two nuts (J). Throw away nuts (J).
TA249102
Go on to Sheet 2