TM 5-5420-202-20-3
MASTER RELAY MOUNTING PLATE AND BRACKET REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
1.
Using hammer, tap two new nuts (A) into plate (B).
2.
Place plate (B) in position on hull floor.
Using 9/16 inch socket, install two screws (C) and lockwashers (D) securing plate (B)
3.
to hull floor.
4.
Using 9/16 inch socket, install two screws (E), and lockwashers (F), securing plate (B)
to hull floor.
5.
Place mounting bracket (G) in position on plate (B).
Using 1/2 inch socket, install two screws (H) and lockwashers (J) securing
6.
mounting bracket (J) to plate (B).
8.
Install master relay assembly (page 10-139).
End of Task
TA249103
10-162