TM 5-5420-202-20-3
ENGINE WIRING HARNESS REPLACEMENT (Sheet 12 of 12)
47. Place wiring harness (A) along
side of engine and place electrical
48. Place four clamps (BM) over
wiring harness (A).
49. Using 7/8 inch wrench, install
eight screws (BN) and lockwashers
(BP).
50. Make sure wiring harness (A) and
electrical connector (BK) are in
position in engine disconnect
mounting bracket (BL).
51. Using screwdriver and 3/8 inch
wrench, install four screws, lock-
washers and nuts (BQ).
52. Install powerplant (page 5-14).
TA249238
End of Task
10-297