TM 5-5420-202-20-3
BASKET/LIGHT SWITCH HARNESS REPLACEMENT (Sheet 2 of 9)
REMOVAL:
CAUTION
Take care to support master control panel during
removal of mounting screws in step 1 below.
1.
Using 7/16 inch socket and 7/16 inch
open end wrench, remove four screws
(A), lockwashers (B), and nuts (C) securing
master control panel (D).
Tilt master control panel (D) forward
2.
to expose cabling at rear.
Go on to Sheet 3
15--42 6.40
Change 7