TM 5-5420-202-20-3
LEFT AND RIGHT FINAL DRIVE REPLACEMENT (Sheet 2 of 4)
REMOVAL:
1.
Check whether lifting eye (A) is installed
in final drive (B).
2.
If lifting eye (A) is installed in final drive
(B), check it for distortion or cracks.
If lifting eye (A) is distorted or cracked, using pinch bar through eyehole (C), turn and
3.
remove lifting eye (A) from final drive (B).
Start threads of new lifting eye (A) into final drive (B).
4.
Using pinch bar, turn and tighten
5.
lifting eye (A).
6.
If lifting eye (A) is not installed in
final drive (B), using socket wrench
handle, remove plug from lifting
eyehole in final drive (B).
7.
Install new lifting eye (A) as in steps
4 and 5 above.
CAUTION
U s e hoist with 1100 pounds minimum
capacity.
8.
Connect hoist to lifting eye (A) on final
drive (B).
Go on to Sheet 3
TA249371
12-3
