TM 5-5420-202-20-3
FINAL DRIVE AIR PRESSURE RELIEF VALVE (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 1)
7/16 in. combination box and open end wrench
TOOLS:
SUPPLIES:
Clean rag (Item 65, Appendix D)
PRELIMINARY PROCEDURES: Remove transmission shroud (page 9-2)
REMOVAL:
1. Using wrench, remove air pressure valve (A) from installation hole (B) in drive
housing.
LEFT SIDE SHOWN
2.
Inspect air pressure valve to make sure that vent cap is free to move on valve. Replace
as required.
INSTALLATION:
1. Using wrench, install air pressure valve (A) into installation hole (B).
2. Install transmission shroud (page 9-6)
TA249374
End of Task