TM 5-5420-202-20-3
UNIVERSAL JOINT REPLACEMENT (Sheet 2 of 7)
REMOVAL:
NOTE
Turn quick-disconnect clamp until it is
in working position.
1. Using cutting pliers, cut lockwire (A)
2. Using extension and 3/4 inch socket, remove
screw (B).
3. Open quick-disconnect clamp (C).
4. Remove quick-disconnect clamp (C).
5. Check quick-disconnect clamp (C) for cracks,
breaks, and sprung hinge. Replace if
necessary.
6. Place large crowbar (D) in position to
support final drive flange (G).
7. While holding down on large crowbar (D),
use pinch bar (E) to pry final drive adapter
assembly (F) until it comes loose from final
drive flange (G).
CAUTION
Use rope capable of picking up and
holding at least 92 pounds.
8. Attach rope (H) loosely to universal joint (J)
Go on to Sheet 3
Change 3