TM 5-5420-202-20-3
FINAL DRIVE VENTING SYSTEM REPLACEMENT (Sheet 6 of 10)
INSTALLATION:
1.
Using 5/8 inch wrench, install adapter (A) into elbow of left air cleaner.
2.
Install clamp (B) onto tube assembly (C) and position tube assembly (C) onto hull.
3.
Using fingers, connect tube assembly (C) to adapter (A).
4.
Using torque wrench with 11/16 inch crowfoot and 5/8 inch wrench to hold adapter (A), tighten tube as-
sembly (C) nut to 75-85 lb-in (8.4-9.5
5.
Using 7/16 inch wrench, install and tighten screw (D) and new lockwasher (E) securing clamp (B) to
hull.
Go on to Sheet 7