TM 5-5420-202-20-3
MASTER BRAKE CYLINDER MOUNTING BRACKET-TIE ROD, PUSH ROD, CLEVIS, AND
BOOT REPLACEMENT (Sheet 6 of 9)
CLEANING AND INSPECTION:
WARNING
Dry cleaning solvent P-D-680 is toxic and flammable.
To prevent personal injury, wear
protective goggles and gloves and use only in a well-ventilated area. Avoid contact with skin,
--
eyes, and clothes and don't breathe vapors. Do not use near open flame or excessive heat. The
flash point for Type #1 Dry Cleaning Solvent is 100F (38C) and for Type #2 is 138F (50C).
If you become dizzy while using cleaning solvent, get fresh air immediately and get medical aid.
If contact with eyes is made, wash your eyes with water and get medical aid immediately.
1.
Using dry cleaning solvlent and rags, clean and dry all parts.
2.
Using steel wool, remove remaining adhesive from groove (AC) on push rod (X).
3.
Inspect all parts for damage or excessive wear. Replace if unserviceable.
Go on to Sheet 7