TM 5-5420-202-20-3
BRAKE CONTROL HOUSING REPAIR (Sheet 6 of 14)
22.
Using 15/16 inch wrench, remove plug
(AN).
23.
Using 9/16 inch socket with extension,
remove two nuts, lockwashers, and flat
washers (AP).
NOTE
Shims are located between
housing assembly (AL) and
transmission on bolts (AQ
and AR), be careful when
removing control housing so as
not to lose shims.
Using 15/16 inch socket and extension,
24.
remove three bolts and packings (AQ)
(under head) and bolt (AR). Throw packings
away.
Remove housing assembly (AL) and shims
25.
(AS).
Remove two packings (AT) and shims
26.
(AU). Throw packings away.
27.
Using 9/16 inch deep well socket, remove
two studs (AV).
28.
Using 3/4 inch socket, remove four spacer
nuts (AW).
Remove gasket (AX). Throw gasket
29.
away.
Remove stud (AY) and eight studs (AZ).
30.
TA249453
Go on to Sheet 7
13-69
