TM 5-5420-202-20-3
BRAKE CONTROL HOUSING REPAIR (Sheet 1 of 14)
PROCEDURE INDEX
PAGE
PROCEDURE
7/16 in. socket with 1/2 in. drive
Retaining ring pliers (external)
TOOLS:
Ratchet with 1/2 in. drive
6 in. steel rule
Slip joint pliers
1/4 in. drive punch
15/16 in. open end wrench
1/2 in. drive punch
15/16 in. socket with 1/2 in. drive
Hammer
9/16 in. socket with 1/2 in. drive
7/8 in. combination box and
Torque wrench with 1/2 in. drive
open end wrench
9/16 in. combination box and
(0-175 lb-ft) (0-237
open end wrenches (two)
5 in. extension with 1/2 in. drive
9/16 in. deep well socket with 1/2 in. drive
3/4 in. socket with 1/2 in. drive
Vise
Vise jaw caps, brass
SUPPLIES:
Cotter pins (two)
Rags (Item 65, Appendix D)
Gasket
Stud
Preformed packings (6 required)
Dry cleaning solvent (Item 55, Appendix D)
Gloves (Item 69, Appendix D)
Shims
Goggles (Item 70, Appendix D)
Remove powerplant (page 5-2)
PRELIMINARY
PROCEDURES:
Remove slave cylinders (pages 13-54, 13-58) (as applicable)
REMOVAL:
NOTE
Clean all parts and general area prior to disassembly
Go on to Sheet 2
