TM 5-5420-202-20-3
TORSION BAR ANCHOR REPLACEMENT (Sheet 1 of 3)
TOOLS: 3/4 in. socket with 1/2 in. drive
Putty knife
Extractor tool set
Portable drill and drill set
Crowbar
Pry bar
SUPPLIES: Gasket
Pins (2 required)
Corrosion preventive (Item 82, Appendix D)
Solid film lubricant (Item 83, Appendix D)
PRELIMINARY PROCEDURE: Remove torsion bar from exact opposite side of vehicle
REMOVAL:
Using socket, remove four
1.
(B) securing cover (C) to
roadwheel housing (D).
Using pry bar, pry cover (C) free from
housing (D).
Remove cover (C), gasket (E), and anchor (F)
as assembly from housing (D). Throw gasket
(E) away.
GO on to Sheet 2
14-31