TM 5-5420-202-20-3
STEERING CONTROL LINKAGE ADJUSTMENT (Sheet 1 of 22)
TOOLS: 7/16 in. combination box and open end wrench
9/16 in. combination box and open end wrench (2 required)
3/4 in. combination box and open end wrench
Torque wrench with 1/2 in. drive (0-175 lb-ft)
9/16 in. socket with 1/2 in. drive
Needle nose pliers
9/16 in. crowfoot with 1/2 in. drive
SUPPLIES:
Metal locating pins (4 required-1/8 in. by 2-1/2 in. long)
Metal pin (1/16 in. by 2 in. long)
Cotter pin
Small gage wire
REFERENCE:
PRELIMIN ARY PROCEDURES:
Remove transmission shroud (page 9-2)
Go on to Sheet 2
TA249654