TM 5-5420-202-20-3
FENDER SUPPORT NO. 4 (LEFT AND RIGHT) REPLACEMENT (Sheet 2 of 4)
Using 5/8 inch socket, remove two bolts (E)
2.
holding extension bracket (C) to support (D).
3.
Remove extension bracket (C) from support (D).
4.
Using 7/8 inch socket and 3/4 inch wrench,
remove two screws (F) and nuts (G) holding
top flange of support (D) to hull support (H).
Using 1-inch socket and hinged handle,
5.
remove four screws (J) and lockwashers (K)
holding support (D) to hull support (H).
6.
Remove support (D).
Go on to Sheet 3
TA249728
16-55