TM 5-5420-202-20-3
FENDER SUPPORT NO. 3 (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 4)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Cleaning and Inspection
Installation
TOOLS: 5/8 in. socket with 1/2 in. drive
3/4 in. socket with 1/2 in. drive
7/8 in. combination box and open end wrench
1 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Hinged handle with 1/2 in. drive
Torque wrench with 1/2 in. drive (0-175 lb-ft)
SUPPLIES:
Lockwashers (4 required)
Locking compound (Item 15,
Appendix D)
Locknut
PRELIMINARY
PROCEDURES:
Remove fender extension (page 16-65)
Remove air cleaner (page 7-90)
Remove front fender center stowage box (page 16-76)
REMOVAL:
NOTE
Left No. 3 fender support is shown, right No. 3 fender support replacement
is similar.
1.
Using 5/8 inch socket, remove screw (A) and flat washer (B) holding extension mounting
bracket (C) to bottom flange of No. 3 fender support (D).
TA249723
Go on to Sheet 2