TM 5-5420-202-34
ENGINE REPLACEMENT
Power Takeoff Removal From Unserviceable Engine (Sheet 1 of 10)
NOTE
Replacement engines are received without the power
takeoff unit installed. The power takeoff and associated
hardware must be removed from an unserviceable engine
and installed on a serviceable engine. The following
instructions are for removal of the power takeoff from
an unserviceable engine.
TOOLS:
Ratchet with 1/2 in. drive
7/16 in. socket with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
13/16 in. socket with 1/2 in. drive
9/16 in. combination box and open end wrench
5/8 in. combination box and open end wrench
3/4 in. combination box and open end wrench
7/8 in. combination box and open end wrench
Wire cutting pliers
8 in. socket wrench extension with 1/2 in. drive
Stud rem over/installer
SUPPLIES: Rags (Item 28, Appendix B)
REFERENCE:
TM 5-5420-202-20
NOTE
Retain all parts removed during this task for later
installation on replacement engine.
Go on to Sheet 2
3-29
