TM 5-5420-202-34
ENGINE REPLACEMENT
Accesory Drive Removal From Replacement Engine (Sheet 3 of 6)
6.
Using 7/8 inch wrench and 3/4 inch wrench, remove hose assembly (E) between fuel
pump (F) and fuel-water separator (G). Use rags to soak up leaking fluid.
7.
Using 7/8 inch wrench and 3/4 inch wrench, remove hose assembly (H) between fuel check
valve (J) and primary fuel filter (K). Use rags to soak up leaking fluid.
8.
Using 9/16 inch wrench, remove nut
(L) securing clamp on hose assembly
(M).
Using 9/16 inch wrench, remove hose
9.
assembly (M) between fuel-water separator
(G) and drain cock (N).
10.
Using 9/16 inch wrench, remove hose
assembly (P) between drain cock (N)
and fuel-water separator solenoid valve
(Q).
Go on to Sheet 4
3-25
