TM 5-5420-202-34
ENGINE REPLACEMENT
Power Takeoff Removal From Unserviceable Engine (Sheet 2 of 10)
1.
Using 9/16 inch wrench, remove four nuts (A) and washers (B) securing right guide (C)
to engine.
2.
Remove right guide (C) from engine.
3.
Using 9/16 inch wrench, remove three nuts (D) and washers (E) securing left guide (F)
to engine.
4.
Remove harness clamps (G) from studs.
5.
Remove left guide (F).
Go on to Sheet 3
3-30
