TM 5-5420-202-34
TRANSMISSION REPLACEMENT (Sheet 6 of 23)
Unplug lead (AS) from thermostatic
27.
switch (AT) on left side of transmission.
28.
Using 15/16 inch wrench, remove switch
(AT) from transmission and tag for proper
installation.
Using 1-5/8 inch wrench to hold adapter
29.
(AU), use 1-1/2 inch wrench and remove
two tubes (AV) from adapters (AU) on
left side of transmission.
Using 1-5/8 inch wrench, remove two
30.
adapters (AU) and washers (AW) from
adapter (AX).
NOTE
It may be necessary to tap adapter
(AX) with a hammer to loosen.
Using procedures described in steps 29 and 30, remove two tubes (AV), adapters (AU),
31.
and washers (AW) from adapter (AX) on the right side of transmission.
32.
On right side of transmission, using 9/16 inch socket, remove four nuts (AY).
Remove adapter (AX) from transmission.
33.
On left side of transmission, using 9/16 inch socket, remove six nuts (AY). Remove
adapter and gasket (AX) from transmission.
Go on to Sheet 7
6-24
