TM 5-5420-203-14
MISCELLANEOUS HYDRAULIC CYLINDER COMPONENTS REPLACEMENT
(Sheet 1 of 2)
TOOLS/EQUIPMENT
General Mechanics Tool Box SC 5180-90-N26
SUPPLIES:
Lock Washer (item 4, Appendix E) (8 required)
Lock Washer (item 5, Appendix E) (2 required)
Loctite, Pneumatic/Hydraulic Seal "569" (item 3, Appendix D)
EQUIPMENT CONDITIONS:
Scissoring Cables and attaching hardware removed (pg 3-20).
Hydraulic Cylinder removed (pg 3-23).
REMOVAL
REMOVE MISCELLANEOUS HYDRAULIC CYLINDER COMPONENTS.
a. Remove two screws (1) and two lock washers
(2) securing one end of shield assembly (3) to
rod end (4) of hydraulic cylinder (5). Discard
lock washers.
b. Remove remaining two screws (1) and two
lock washers (2) securing remaining end of
shield assembly (3) to rod end (4) of hydraulic
cylinder (5). Discard lock washers.
c. Remove shield assembly (3) from hydraulic
cylinder (5).
d. Repeat steps a. thru c. for second shield
assembly (6) located on cap end (7) of
hydraulic cylinder (5). Discard lock
washers (2).
e. Remove nut (8) and lock washer (9) from
screw (10) securing one side of lower
retaining strap (11) and upper bracket
assembly (12) to hydraulic cylinder (5).
Discard lock washer.
f. Remove screw (10).
g. Repeat steps e. and f. for opposite side of
lower retaining strap (11) and upper bracket
assembly (12). Discard lock washer (9).
h. Remove lower retaining strap (11) and upper
bracket assembly (12) from hydraulic cylinder (5).
3-26
