TM 5-5420-203-14
NEAR-SHORE RAMP SECTION TRANSVERSE BRACE REPLACEMENT
General Mechanics Tool Box SC 5180-90-N26
TOOLS/EQUIPMENT:
Lifting Device (2000 lbs capacity)
Sling, Multiple Leg
None.
SUPPLIES:
Scissoring Cables and attaching hardware removed (pg 3-20).
EQUIPMENT CONDITIONS:
Hydraulic Cylinder removed (pg 3-23).
Cylinder Beam removed (pg 3-31).
Two
PERSONNEL:
REMOVAL
REMOVE NEAR-SHORE RAMP SECTION TRANSVERSE BRACES (2 and 4).
WARNING
The hydraulic cylinder is heavy and can crush you. Stay clear of the cylinder when
it is suspended. Only personnel necessary to the task should be in, on, or around
the task area.
a. Remove four bolts (1) from transverse brace
(2). Remove transverse brace (6).
b. Remove four bolts (3) securing transverse
brace (4) to sections (5 and 6). Remove
transverse brace (4).
INSTALLATION
INSTALL NEAR-SHORE RAMP SECTION
TRANSVERSE BRACES (2 and 4).
a. Install transverse brace (2) in position on
sections (5 and 6).
b. Install four bolts (1) securing transverse
brace (2). Tighten four bolts (l).
c. Install transverse brace (4) in position
on sections (5 and 6).
d. Install four bolts (3) securing transverse
brace (4). Tighten four bolts (3).
END OF TASK
3-35
