TM 5-5420-203-14
NEAR-SHORE CENTER SECTION TRANSVERSE BRACE REPLACEMENT
(Sheet 2 of 2)
b. Be sure opposite side of brace (2) falls on the
same side of the center section clip angles.
c. Install four bolts (1) securing transverse brace
in position. Tighten bolts (l).
d. Position second transverse brace (4) in
position as shown on one side of clip angles.
e. Be sure opposite side of brace (4) falls on the
same side of the center section clip angles.
f. Install four bolts (3) securing transverse brace
in position. Tighten bolts (3).
END OF TASK
3-38