TM 5-5420-203-14
FAR-SHORE CENTER SECTION TRANSVERSE BRACE REPLACEMENT (Sheet 1 of 4)
TOOLS/EQUIPMENT
General Mechanics Tool Box SC 5180-90-N26
Lifting Device (2000 lbs capacity)
Sling, Multiple Leg
None.
SUPPLIES:
Cable Beam removed (pg 3-14).
EQUIPMENT CONDITIONS:
Far-Shore Ramp Section removed (pg 3-48).
Two
PERSONNEL:
REMOVAL
REMOVE FAR-SHORE CENTER SECTION
TRANSVERSE BRACES (2 and 25).
NOTE
Cable beam, cables, struts, etc., not
shown for clarity.
a. Remove four bolts (1) securing transverse
brace (2) in position.
b. Remove transverse brace (2).
c. Using a lifting device cable
(3), place sling (4) around the
center and thru holes in the middle
of quadrant (5). Take a slight strain
on the quadrant with lifting device.
d. Place a wood block (6) under the
lower portion of the quadrant to
preclude rolling. Leave the sling
and lifting device attached.
3-39
