TM 5-5420-209-12
4-29. Rear Winch Assembly. - Continued
(18)
(19)
(20)
(21)
(22)
(23)
(24)
(25)
(26)
(27)
(28)
Lubricate preformed packing (58) and install in thrust pad (57).
Install thrust pad (57) in planet hub (55) with the slotted face of thrust pad (57) facing out.
Install plug (51) in end of planet pin (53).
Press bearing (56) into gear (54).
Install gear (54) in planet hub (55) and install planet pin (53).
Aline hole in planet pin (53) with hole in planet hub (55) and install pin (52) until pin (52) is 0.1875 in. (0.4762
cm) below surface of planet hub (55).
Repeat Steps (20). through (23). for remaining gears.
Check that all three gears rotate freely.
Install primary drive assembly (49) in primary drive housing (66).
Ensure primary drive assembly (49) is fully sealed and turns freely.
Install busing (50).
4-86
