(10)
(11)
(12)
(13)
(14)
(15)
(16)
TM 5-5420-209-12
Install gear (55) in planet carrier (56).
Install shaft (54) in planet carrier (56) and ensure hole in shaft (54) aligns with hole in planet
carrier (56).
Install pin (53) until flush with planet carrier (56).
Repeat Steps (10) and (11) for remaining gears.
Check that all gears spin freely.
Install inner retaining ring (57) on gear (58).
Install gear (58) in planet carrier (56) and install outer retaining ring (59).
Figure 4-24. Winch Assembly Model PG-115-043R, Reassembly (Sheet 3 of 7).
4-107
