TM 5-5420-209-12
4-29. Rear Winch Assembly. - Continued
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)
Install gear (47) in planet carrier (46).
Install shaft (45) in planet carrier (46) and ensure hole in shaft (45) aligns with hole in planet
carrier (44).
Install pin (44) until flush with planet carrier (46).
Repeat Steps (17) and (18) for remaining gears.
After all three gears are installed, ensure all gears spin freely.
Install roller bearing (48).
Install seal (19).
Lubricate preformed packing (51) with grease and install.
Figure 4-24. Winch Assembly Model PG-115-043R, Reassembly (Sheet 4 of 7).
4-108
