TM 5-5420-209-12
4-30. Winch Motor Assembly (Used on Winch Model 11-S-EC). - Continued
e. Installation. (figure 4-29)
(1) Install motor (1) in housing (2) and aline marks on housing (2) and motor (1).
(2) Install retaining ring (3).
(3) Lubricate packing (4) with grease and install on motor (1) and relubricate with grease.
(4) Install brake springs (5) as noted during disassembly.
(5) Lubricate packing (6) with grease and install on motor (1) and relubricate with grease.
(6) lnstall cover (7) and aline marks on cover (7) and motor (4).
(7) Install 12 screws (8) and washers (9) and tighten scews in either a clockwise or counterclockwise sequence
until all screws are torqued to 35 ft-lbs (4.8 mkg).
(8) Install two pipe lugs (10) and (11).
4-124
