ARMY TM 5-5420-212-10-1
MARINE CORPS TM 08676A-10/1-1
8-8 ROLLER BEAM (Jack Hood, Roller Catch)
This task covers:
a.
Removal
b.
Service/Repair
c.
Installation
INITIAL SETUP
Tools Required
10 inch screwdriver
8 Inch pliers
1 lb ball peen hammer
6 inch flat file
Materials Required
Clean cloths
Crocus cloths (25, Appendix D)
Equipment Conditions
Roller beam on raised flat surface.
a.
Removal
(1)
Remove cotter pins (1) from headed pins (2), securing both sides of jack hood (3), with hammer,
screwdriver and pliers.
(2)
Support jack hood and withdraw headed pins (2) collecting washers (4) and lift hood off roller beam (5).
8-16
